Skip to content
Newton BrookLocksmith Specialists · TorontoOpen 24/7(289) 819-2910Request a visit
Newton BrookNewton BrookLOCKSMITH SPECIALISTS
Two technicians in green shirts look over a metal tray holding a chrome tool beside a white van with open rear doors.

Locksmith in Toronto, OntarioExit doors thatopen when they must.

Fire exits have one job, and it is the opposite of a lock's. We install and service push bars, exit alarms and door closers so a crowd can leave in seconds while the door stays secure from outside.

Hands clamping a key blank in a key-cutting machine on a wooden bench, with a car remote, screwdriver and wire brush nearby.

From the shop

A locksmith you would recommend to a neighbour.

Older houses around here have older doors, and older doors have their own logic. A mortise lock from the 1920s was built to be serviced, not thrown away, and a rim lock on a back porch may simply need cleaning and a new spring. We carry the parts and the patience to keep original hardware working, and we say so when replacement is the wiser route.

— Newton Brook Locksmith Specialists

  • You know what is happeningFrom the first look to the last turn of the key, we narrate the job in plain terms. You should never wonder what we are doing to your door.
  • Suggestions, not pressureIf we think an upgrade would help, we say so once and explain why. If you decline, that is the end of it.
  • The old parts handledRemoved locks and keys are given to you or taken away as you prefer. Old keys that no longer work are worth destroying, and we will do that if you like.

Hours

  • HoursOpen 24/7
  • Nights and weekendsSame fees
  • In business12 years
  • VisitsOn-site assessment

Locksmith services

Lock and key services

Think of this page as a menu rather than a manual. You do not need to know the name of the part or the type of cylinder in your door. Pick the section that sounds closest, read what the visit looks like, and we will fill in the details together.

Lockouts

Lockout Services

Every lockout call gets the same question first: can you show us this is your place or your vehicle? A licence with the address, a lease, a registration document or a neighbour who can vouch for you all work.

Change or rekey

Change or Rekey Locks

If the previous owner left a drawer full of unlabelled keys, you are not alone. Rekeying, matching cylinders across doors and cutting a small number of fresh keys turns that drawer into two rings that make sense.

  1. Two detached brass lock cylinders and four house keys on a wooden counter. — Lock Rekeying, Toronto
    Lock RekeyingEvery copy of your house key seems to work a little differently. One needs a jiggle, another sticks halfway, and the original wore down years ago.
  2. Person holding a silver-colored lock beside an open wooden door with exposed circular holes and a latch at its edge. — Deadbolt Installation, Toronto
    Deadbolt InstallationSomeone tried the door last winter. The frame took it, but the strike plate is bent, one screw hole is stripped, and the bolt sits in the pocket at a slight angle.
  3. Detached satin-nickel lever hardware, tubular latch and strike plate on a wooden workbench. — Lock Replacement & Upgrade, Toronto
    Lock Replacement & UpgradeSomeone tried the back door while you were away. The jamb is splintered around the strike, the bolt is bent, and the knob turns with a grinding feel.
  4. Person holding a long door handle and rectangular lock case beside an open wooden door with exposed hardware recesses. — Vintage Mortise Lock Service, Toronto
    Vintage Mortise Lock ServiceThe knob flops loose on its spindle and never springs back to level. When you turn it the latch pulls in, but you have to push the knob back yourself, and lately the latch has started staying inside the door instead of…
  5. Person holding a black door-handle assembly and a latch beside a glazed door with exposed lock openings. — Smart Lock Installation, Toronto
    Smart Lock InstallationThe deadbolt is a stiff double-cylinder model that needs a key from both sides, and in the dark hallway finding it is a nuisance. You want a thumb-turn inside, a keypad outside, and a door that locks itself behind you.
  6. Pale blue garden gate with a black lever latch between light stone pillars. — Gate & Building Entry Locks, Toronto
    Gate & Building Entry LocksThe driveway gate drags a groove into the gravel every time it swings, and the latch stopped catching weeks ago. Now it sits propped shut with a brick, waiting for anyone to walk through and forget to prop it back.
  7. Detached threaded cam lock and mounting washer on a workbench in front of closed mail compartments. — Mailbox Lock Replacement, Toronto
    Mailbox Lock ReplacementSomeone tried to pry the little door on the mailbox open with a screwdriver, and though the mail sitting inside is untouched, the lock now sits crooked in its hole and the key barely catches when it is turned.

Commercial

Commercial Locks

A master key system lets the owner open every door with one key while each employee's key opens only what they need. It is a plan on paper before it is hardware in a door, and the master key page explains how we design it with you.

Toronto

Calls like these

Technician in a cap using a yellow drill at the round bore of a dark door, with a black knob below it.

Business Lockout Service

Minus eighteen with a wind, and the exterior cylinder on the shop door has frozen solid overnight after yesterday's slush. The key goes in halfway and stops. The delivery driver is due, the phone is ringing inside, and nobody can reach it.

Business Lockout Service

Which fix fits?

The padlock on the back gate has rusted shut.The usual fix

UsuallyReplace it with a weather-rated padlock.

WhyA shrouded shackle and a drainage-friendly body cope with rain and salt far better than an indoor lock left outside.

The shed holds the bikes and the lock is a flimsy one.The usual fix

UsuallyA hasp and a proper padlock.

WhyThe hasp matters as much as the lock; fitted with carriage bolts it resists prying.

The mailbox key is lost and the mail is piling up.The usual fix

UsuallyReplace the mailbox lock and cut new keys.

WhyWith proof the box is yours, the cam lock swaps out cleanly and you get two keys for it.

After the fit-out, the gym floor now holds more people than the old office space ever did, and the exit door at the back still has the same turn-lock it had…The usual fix

UsuallyPanic & Exit Hardware

WhyA code trigger usually starts the conversation: an occupant load over a threshold, a fire inspector's note, or a new use for a room that used to hold far fewer people.

The key to the office entrance turns with almost no resistance now, and some mornings the deadbolt does not fully retract until someone jiggles the handle and…The usual fix

UsuallyCommercial-Grade Lock Replacement

WhyBusinesses often reach this service after something specific happens: a break-in, a departing employee holding a working key, a lease turnover, or an inspector's note about the rear exit.

Someone pushed the privacy button on the bathroom door and pulled it shut behind them, leaving the room locked and empty.The usual fix

UsuallyHome Lockout Service

WhyMost lockouts end with the original lock still on the door and still working.

Open 24/7

How a visit goes

Commercial doors carry hardware that most homes never see, and reading it correctly is the first skill of a business lockout. An aluminium storefront door usually has a narrow mortise cylinder driving a hookbolt deadlock or a paddle-operated deadlatch.

Drawing: a house seen from the street. The van pulls up, the garage door is opened for the work, then it closes level and the porch light comes on.
  1. 1 of 3

    Understanding the safe

    We ask what the safe is for, how it is opened and what has changed: a lost combination, a dead keypad, a bolt that will not retract. Each points to a different approach.

  2. 2 of 3

    Opening or repairing carefully

    Where a combination can be reset or a keypad replaced, we do that. Where the safe must be opened without its code, we use the method that leaves it usable afterwards.

  3. 3 of 3

    Setting it up for you again

    Once it works we help you choose a new combination or code, show you how to change it later and suggest a sensible place to keep a record.

Toronto, Ontario

Toronto information

Town
Toronto, Ontario
In business
12 years
Hours
Open 24/7, same fees any hour
Visits
On-site assessment preferred

2021 census · what it means at the door

  • 58%Older homes

    About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

    Period hardware on older homes deserves matching parts, not a mismatched modern set. A locksmith who works among such houses keeps finishes and styles that suit them, so a repaired or replaced lock still looks like it belongs to the door.

  • 23%

    Single-detached houses make up about 23% of homes in Toronto (2021 Census).

    Townhouses share walls but usually have their own front door and often a back door or garage. Keying both alike, and checking the strike on the less-used door, is the everyday work in a neighbourhood of attached homes.

Source: Statistics Canada, Census Profile

Frequently asked questions

(289) 819-2910

How do you confirm I am allowed to have the business opened?

Through identification and a link to the premises. An owner shows photo identification with the lease, business registration or a document addressed to the company at that address. A manager or employee is confirmed by a call to the owner, head office or property manager on a number the locksmith can verify. If everything is inside, the check is finished after entry, before the locksmith leaves.

We have just taken over a unit and have no keys for the old locks. Is that a lockout?

It is treated as one, with the same authority check: your new lease and identification settle it. The locksmith opens the previous occupant's locks, then rekeys or replaces them so keys still floating around from the last tenant stop working. It is also the moment to decide how the unit will be keyed: one key for every door, separate keys for the cash office and stockroom, or cores that suit a growing staff.

Can you also deal with the back door, the roll-up shutter and the gate?

Yes. A business lockout covers every opening the premises relies on: the rear service door with its exit device, a roll-up shutter and its padlock, the compound gate, a mailbox in the lobby and interior doors such as the cash office or server closet. Mention each one when you call so the right padlock shackles, cores and cylinders are in the van, and so cylinders that should share a key are handled together.

Will the new cylinder fit my existing locks?

Usually. High security cylinders are made in the common formats: key-in-knob and lever, rim, mortise and interchangeable core, and many are designed to drop into popular residential and commercial locks. The locksmith identifies your format and confirms fit before ordering. Where a lock is an odd size or in poor shape, a matching lock body is fitted instead, and the door preparation is reused wherever it is standard.

On-site assessment preferred

Request a visit

Send a photo of the lock. Call about rekeying your new home.

Newton Brook Locksmith Specialists

Locksmith · Toronto

Open 24/7

(289) 819-2910

12 years in business

Open 24/7 · call(289) 819-2910Request a visit