Locksmith in Willowdale, OntarioSafes opened,combinations changed.
An inherited safe with no combination, a dial that has drifted, a keypad that stopped responding: each has a proper way in that preserves the box. We open, service and reset safes for homes and small businesses in Willowdale, and explain how to keep the mechanism turning for the next owner. Nearby, we also work in Fisherville.
After a break-in, households in Willowdale need the door secured tonight and the decisions made later. We come out, board or repair what is damaged, replace or rekey anything that might have been compromised, and leave you with a locked house. Conversations about strike plates and better cylinders wait until the shock has passed and you are ready to have them.
— Newton Brook Locksmith Specialists
You know what is happeningFrom the first look to the last turn of the key, we narrate the job in plain terms. You should never wonder what we are doing to your door.
Suggestions, not pressureIf we think an upgrade would help, we say so once and explain why. If you decline, that is the end of it.
The old parts handledRemoved locks and keys are given to you or taken away as you prefer. Old keys that no longer work are worth destroying, and we will do that if you like.
Hours
HoursOpen 24/7
Nights and weekendsSame fees
In business12 years
VisitsOn-site assessment
Locksmith services
Lock and key services
Here is the range of lock work we do for homes and businesses in Willowdale: opening doors when the key is missing, rekeying and changing locks, fitting deadbolts and high-security cylinders, servicing commercial hardware, opening and resetting safes, and cutting keys, including the occasional vehicle key when a household needs one.
Every lockout call gets the same question first: can you show us this is your place or your vehicle? A licence with the address, a lease, a registration document or a neighbour who can vouch for you all work.
If the previous owner left a drawer full of unlabelled keys, you are not alone. Rekeying, matching cylinders across doors and cutting a small number of fresh keys turns that drawer into two rings that make sense.
About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.
Basement and side entries on older homes were often fitted long after the house was built, with whatever lock was on hand. Bringing those doors up to the standard of the front entry, and onto the same key, is a common and satisfying job.
23%
Single-detached houses make up about 23% of homes in Toronto (2021 Census).
Landlords and property managers dominate in attached housing, and they want keys organised. A locksmith sets up master systems so a manager carries one key while each tenant's key opens only their own door.
WhyFor landlords and tenants, rekeying is the tidy way to handle a change of occupancy.
The padlock on the side gate has gone stiff every winter for three years running, and this year the key simply will not turn past the first few pins.The usual fix
WhyHardware bolted to a gate or an exterior building door lives outside every day of the year, which is a different job from a lock tucked behind a storm door.
The till drawer has been holding two days of cash because the new shop never got a proper safe, and a locked drawer under the counter is the only thing…The usual fix
WhyBusinesses call for this service for two different reasons that sometimes overlap: protecting cash held overnight, and protecting paper records that would be enormously slow to recreate.
They lead to the same result, a door that a different key opens, by different means. Changing the locks puts new hardware on the door. Rekeying keeps the deadbolt and handle you have and changes what is inside the cylinder, commonly the bottom pins on a conventional lock or a reset on a homeowner-rekeyable one, so a new key operates it and the old one turns nothing. For hardware in good condition, rekeying is the natural choice after a lost key because nothing about the door's look or fit changes.
How is rekeying different from replacing the lock?
Rekeying keeps your existing deadbolt or handle set and gives it a new key, commonly by changing the pins inside, though some cylinders reset a different way. Replacing removes the whole lock or cylinder and fits new hardware. Rekeying suits locks that are in good condition and simply need a fresh key. Replacement is the better call for hardware that is worn or damaged, built to a low grade, on a keyway the other doors cannot share, or due for a change of style or a keypad.
Does this service cover the gate itself, or only the lock?
Both, where the two are connected, which on a gate they usually are. A locksmith working on a gate lock also looks at the hinges, the post and the closer, since a lock rarely fails on its own when the real cause is a sagging gate or a post that has shifted. Work that goes beyond hardware the locksmith carries, such as rebuilding a rotted post or a damaged fence panel, is flagged so it can be handled by whoever normally does that kind of repair.
What happens if a previous owner's combination is unknown?
That situation calls for opening the safe first, which is handled as its own service using non-destructive methods wherever the lock allows, before a new combination or code is set. Once open, the installation or servicing continues as normal: the lock is checked, the anchoring is confirmed or fitted, and a fresh combination known only to the current owner is set before the visit ends.
Can I still lock the door from outside?
Yes. The releasing device only governs the inside of the door; the outside gets its own trim, a pull, a lever with a cylinder, or a keyed cylinder alone, chosen for how that door is entered. Locking or unlocking that outside trim has no effect on the inside crossbar, which always releases the latch under a push, so entry security and exit function are handled as two separate questions.
On-site assessment preferred
Request a visit
Send a photo of the lock. Call about rekeying your new home.
Lost Keys — Same-Visit RekeyYou let a part-time employee go on Friday.
Lock RekeyingEvery copy of your house key seems to work a little differently.
Gate & Building Entry LocksThe driveway gate drags a groove into the gravel every time it swings, and the latch stopped catching weeks ago.
Safe Installation & ServicingThe keypad on the office safe blinks a low-battery warning every morning now, and whoever notices it first quietly hopes someone…
Panic & Exit HardwareThe fire inspector's note is blunt: the banquet hall's second exit still turns on a deadbolt, and the crowd it is rated to hold…
Commercial-Grade Lock ReplacementA new tenant moved into the unit next door, and the property manager just found three different cylinders on three doors, none of…
Key Fob ProgrammingThe remote clicks the way it always has, but the vehicle no longer locks, unlocks or answers with its usual chirp.
Vehicle Lock RepairSince the last heavy rain, the front passenger door has needed two or three tries before the key catches, and moisture seems to…
Motorcycle & Scooter KeysThe dash lights come on, the starter cranks, and the engine simply refuses to catch, though the same key has run this bike since…
